Living room

Perfect sofa for the cabin

Here we show you how to create a space-built cabin with smart storage space.

Perfect sofa for the cabin

Materials:

16 millimeters of mdf in all parts.

21 x 58 smooth edge in armrests, backrest and in the table at the bottom, back on the backplate.

21 x 45 smooth edge in bones and spikes, the table attached to the back of the front, and the stool on the inside of the side arms.

21 x 21 smooth bottom at the front of the backplate.

Perfect sofa for the cabin

How to avoid the carpenter

Perfect sofa for the cabin

This will make you wrong with joining

Perfect sofa for the cabin

The smartest accessory to circular history

This is a space-built cabin, that is, it is attached to the floor and wall. The base is a fire seat, which you can easily change to three or two seater.

This is not the easiest project we have presented on clicks. no, we will designate the carpentry of this couch as a little over medium demanding.

If you want to increase the level of difficulty further you can create a horse school solution. Then there will be extra joining to make corners and some adjustments of the pillows.

Tip:

Get cut as much as possible wherever you buy the plates. In this project 90 percent can be cut in advance.

Starting from finished pillows. It saves you a lot of work.

All joints are glued and screwed / stapled.

Screw / pin from the inside where possible, saving you too much sparkling.

Perfect sofa for the cabin

SCREEN FORFRA: Here you can see how the entire sofa is put together. Photo: ILLUSTRATION: Øivind Lie

Perfect sofa for the cabin

SCREEN BAKFRA: Here you can see how the end of the sofa is assembled. Photo: ILLUSTRATION: Øivind Lie

Perfect sofa for the cabin

EXTERNAL HYLLE: We built an extra shelf behind the sofa on both sides. To get the dust-free lower sofa we have mounted a black painted plate between the legs. Photo: Per Erik Jæger

Perfect sofa for the cabin

STORAGE: Under each pillow there is a storage room. Photo: Per Erik Jæger

Perfect sofa for the cabin

VANGE: Merge sideways first. Photo: Øivind Lie

Perfect sofa for the cabin

FRONT: Fit the front and the list to the rear. Once you have put together the two pieces, check with the angle and fasten a piece of table top. Then the parts stay in an angle. Photo: Øivind Lie

Perfect sofa for the cabin

RYGGEN: The table that supports your back attaches to your armrest. Add a stiff underneath to get a strong join. Photo: Øivind Lie

Perfect sofa for the cabin

BACKGROUND: Here you attach a 21 x 45 smooth edge to the back and a 21 x 21 front cover. Keep in mind that these must protrude 35 millimeters on both sides. Photo: Øivind Lie

Perfect sofa for the cabin

CLEAR THE RIDGE: The tables attached to the backrest rest on the table piece attached to the side jaws. Unscrew them from the outside of the side wings, plus you turn them into the bobbin. Remember to forbade. Turn the backplate to the table that supports your back. Photo: Øivind Lie

Perfect sofa for the cabin

SETUP PLATES: Lay in the seat plates and fasten the hinges. At sidewalls, check that they do not stop in the armrest when opening them. Secure the sofa to the floor and wall. Use long screws as you turn obliquely down through your legs. Photo: Øivind Lie

Perfect sofa for the cabin

HORSE SOLUTION: The seat plate in the corner must be in all directions. Therefore, the front and list must be moved down where the lid should lie. Photo: ILLUSTRATION: Øivind Lie

Perfect sofa for the cabin

BUILD UP: To crumble will flutter with the others you can build up with tables that you chop. Photo: Øivind Lie

Thanks to the mower Sven Eckhoff for good advice.

Pillows: Lilleberg pillow set, these come in two different sizes.

Also read:

How to customize your summer cabin

Summer’s roughest garden furniture

Outdoor equipment you can afford

.

Leave a Reply

Your email address will not be published. Required fields are marked *

Adblock Detected

Please consider supporting us by disabling your ad blocker